Steps for Pressure Washing Before Painting

 When you want to apply paint to the exterior of your property, it is important to check if it is completely clean. To make sure that the surface does not have any dirt opt for pressure washing. You can get professional help from pressure washing services Boston to make your surface squeaky clean. Let us see how to pressure wash the surface.

Step-by-step guide to pressure wash the surface

1.    If you have shrubs at the side of your building, make sure to cover them with plastic before pressure washing. Those who do not cover the leaves can see them easily fall. Although it will not kill off the shrub, but it can cause a lot of damage to its growth.

2.    Next, with plain water, clean the overall siding to get rid of any dirt or debris present. Make sure not to use any washing solution. Use a wide-angle spray with low pressure for this step.

3.    Those areas, which have mildews often have discoloration. Mix one part bleach and ten parts water to clean this area. With the help of a garden pipe, you can apply the bleach solution. Make sure to cover your plants when doing this step.

4.    When the siding does not have direct sunlight and the winds are calm, you should apply the cleaning solution. Look at your pressure washer to check the instruction for the cleaning solution. With horizontal movement, you can clean the siding with a cleaning solution.

5.    After applying the cleaning solution, let it sit for ten minutes. Next, with the help of freshwater, you can apply and rinse off the solution. Make sure the rinse is done from top to bottom to get rid of all the dirt and debris.

Although this can be done at home, some people do not have the time or patience. There is a great pressure washing service Boston present who can help get the job done.